Skip to main content

Lumberjeans

Made from raw Japanese selvedge denim combined with ultra-tough aramid fibres.

$445$13370% off

Model is 6ft 2 / 188cm with a 32 inch / 81cm waist, and wears size Medium.

  • 14 oz. raw selvedge Japanese denim
  • Material woven with aramid fibres for extreme strength
  • Tough enough to survive 75kmph falls

The first ever pair of jeans were made for a lumberjack. Built for life in the woods, they were designed to be exceptionally tough – the strongest pants anywhere in the world at the time. But over the last 150 years, jeans have changed to the point where the original lumberjacks wouldn’t even recognise them. Skintight pants with premade rips are about as far away from the origin of jeans as you can get.

So we’ve gone back to the first days of jeans to build them as they were meant to be built. We’ve worked with the world’s most fabled mills and the master craftsmen of denim, and combined that with the toughest modern day materials to create some of the strongest jeans ever made. The Blue edition is made with high-strength raw denim, spun on low-speed looms to create the tightest possible weave, then woven with aramid fibre which is stronger than steel, and reinforced with Cordura panels. They’re the jeans lumberjacks would have wanted.

Waterfallproof Jacket

Ultra-technical, waterproof, breathable, and built with Swiss material technology.

$1,195$358 70% off

Technical Details

3 layer material made in Switzerland
Material engineered with Schoeller c_change® membrane and nanosphere® technology
Highly waterproof
Fully seam-sealed for waterproofness
Highly windproof
Highly breathable
Phone pocket on chest fitted with watertight zipper
Water resistant front zipper protected by external and internal storm flaps
2 side pockets with water resistant zippers protected by storm flaps
3 laser cut vents under each arm
Elasticated cord tightening at the back of the hood
Cord tightening at hem
Stretch gaiters at cuffs
Jacket weighs 600 grams
The fabric is Bluesign approved – a system for environmentally friendly production
Machine wash 40°C
Constructed in Vietnam
01 03

Built with a Swiss supermaterial

The Waterfallproof Jacket is designed to combat the megastorms of the future, where crazily intense rainfall becomes the norm. Highly waterproof, windproof and breathable, it’s constructed with an advanced 3 layer Swiss material from Schoeller, with an intelligent membrane that opens and closes in the heat, and self-drying nanotechnology borrowed from plants. Building the material alone requires a total of 28 separate construction processes.

Water rolls off the outside like a lotus leaf

The outside of the Waterfallproof Jacket mimics one of nature’s most brilliant pieces of engineering – the lotus leaf. Over millions of years the lotus leaf has adapted to life constantly surrounded by water. Although the surface of each leaf looks completely flat, it’s covered with a complex landscape of microscopic bumps which helps it stay clean and dry.

The outside of the Waterfallproof Jacket mimics one of nature’s most brilliant pieces of engineering, so water simply rolls off it.

Highly waterproof and highly breathable at the same time

The issue with creating something crazily waterproof is breathability. The more water can’t come through one way, the harder it is to let it come out the other. A rubber wetsuit for instance would never let any rain through, but if you tried to go for a run in one you might pass out as it won’t let heat or sweat escape efficiently. So the middle layer of the jacket uses Schoeller’s c_change® membrane. Instead of remaining static, the membrane can open and close to respond to different weather conditions as they happen, while remaining permanently waterproof and windproof.

The jacket is designed to combat the megastorms of the future, where crazily intense rainfall and snowstorms become the norm.

How the membrane works in the heat and wet

As the air temperature rises, the membrane opens up so that excess sweat and heat can escape through the jacket. But while the membrane’s polymer structure opens up to become extremely permeable to water vapour leaving the body, it remains completely waterproof on the outside. It means that even if you held a jacket under a downpour in extreme heat, the jacket will only ever let the water through one way, while still letting heat pass through it.

Fitted with a watertight chest pocket

While every zipper on the Waterfallproof Jacket is built to cope with extreme volumes of rain, we’ve fitted the jacket with a chest pocket that can survive total immersion in water. Even if you’re wading in chest deep water, anything inside it will stay dry. It’s built with an incredibly heavy-duty waterproof zipper that looks a bit like a rubber anchor and is normally only found in scuba diving gear. Just as no water could get in, no water could get out. So if you’ve always wanted to take your pet goldfish out for a walk, fill up the pocket and now you can.

Engineered for movement

The jacket will stretch with you whatever you’re doing. But instead of relying on elastane, we use an advanced weaving process which creates mechanical stretch to achieve the same effect. Articulated sleeves follow the natural shape of your arm. And you’ll find three laser cut vents under each arm to help keep air flowing around your body when you’re working hard.

Size + Fit

The Waterfallproof Jacket is designed with a regular fit.

SizeXSSMLXLXXL
Fits chest83 - 9091 - 9899 - 106107 - 114115 - 122123 - 130
Fits waist71 - 7676 - 8181 - 8686 - 9191 - 9696 - 101
SizeXSSMLXLXXL
Fits chest33 - 3636 - 3939 - 4242 - 4545 - 4848 - 51
Fits waist28 - 3030 - 3232 - 3434 - 3636 - 3838 - 40