Steel Blazer

Lightweight. Versatile. Water repellent. Reinforced with stainless steel.

$795

Model is 6ft 2 / 189cm with a 40 inch / 101cm chest, and wears size Large.

  • Constructed with 24% stainless steel
  • Lightweight, malleable and soft
  • Water repellent on the outside

The 20th century was practically built from stainless steel. From cars, to cities, to skyscrapers. And now it has its sights set on building the 21st century too. Starting with rockets and clothing.

While the human body is not built for the cryogenic temperatures of outer space, stainless steel thrives out there. At about 2.7 Kelvin, or -270°C, its strength increases by 50%, which is one of the many reasons the entire outer body of the SpaceX Starship will be built out of it. The most powerful rocket ever built has been developed so it can not only be reused, but relaunch just an hour after each landing. So stainless steel’s toughness and extreme temperature resistance won it the job. It can cope with temperatures of up to 870°C – allowing Starship to withstand the hundreds of re-entries into Mars and Earth’s atmospheres it’s being designed for.

Back on Earth, it’s taken 4 years of R&D to turn corrosion resistant stainless steel into a jacket you can just throw on. The Steel Blazer is a lightweight two-layered jacket reinforced with 24% stainless steel. Malleable, strong and weather resistant, it comes with a convertible collar you can wear two ways, four pockets, metal detailing, a soft and breathable inner lining, and shoulder construction that looks like overlaid steel plates.

Technical Details

Main material made in Italy: 76% polyamide, 24% stainless steel
Water repellent
Wind resistant
Lining made in South Korea: 60% cotton, 40% polyamide
Three patch pockets on the front
One internal chest pocket
Jacket fastens with five hidden metal snaps
Collar can be worn with lapels or fastened up to the neck
All critical seams twin needle stitched for strength
Jacket weighs 518 grams
Dry clean only
Constructed in China
01 02

It’s built with the same material as the first SpaceX Starship bound for Mars.

The Steel Blazer is built with 24% stainless steel

Back on Earth – after 4 years of R&D – we’ve finally turned the same corrosion resistant, stainless steel, into lightweight and versatile clothing. The Steel Blazer is a two-layered jacket reinforced with 24% stainless steel. Malleable, strong and weather resistant, it comes with a convertible collar you can wear two ways, four pockets, and a soft, breathable lining on the inside.

How the jacket looks and feels

It doesn’t feel like you’re wearing metal when you put the Steel Blazer on. It’s malleable, soft and lightweight. But it holds its shape slightly more than normal materials, so each jacket develops unique crease patterns in areas like the sleeves. You’ll also feel a subtle grain under your fingers when you touch it – and these are the steel fibres you’ll be feeling. The shoulder construction looks like overlaid steel plates. And by combining 24% stainless steel with 76% nylon, we’ve created a fabric that appears to warp and shift as the light hits it.

The 20th century was practically built from stainless steel. Now it has its sights set on building the 21st century too. Starting with rockets and clothing.

Built with four pockets

The jacket’s design is based on original workwear jackets – like the chore jacket and the architect’s jacket. So you’ll find three patch pockets on the front – one on the chest and two lower down. There’s also an internal chest pocket designed to hold your phone or wallet.

The Steel Blazer is lightweight, versatile, water repellent, and reinforced with stainless steel.

The jacket comes with a soft and lightweight lining

Each jacket is lined with a lightweight material that combines cotton for softness and nylon for durability. The lining adds wind resistance while remaining breathable in the heat. And we’ve constructed it with an inverted pleat in the middle of your back for freedom of movement.

It’s taken 4 years of R&D to make

Humans haven’t been wearing much steel since the last suits of armour a couple of centuries ago, and the reason is pretty straightforward. Turning metal into a soft material is incredibly difficult and takes more time and more money than it does to build a conventional fabric. Even after years of R&D, making the material is still a multi-week process. Our stainless steel is first stretched out into super thin strands by an advanced Italian facility to create steel yarn. The yarn is then woven with nylon on looms which have to be specially adjusted to accommodate the steel fibres.

It’s taken 4 years of R&D to turn stainless steel into a jacket you can just throw on.

It’s weather resistant and self-healing

Stainless steel is steel fused with a few other raw materials. Typically it’s made up of 10% to 30% chromium, which is the main element that makes it corrosion resistant. Corrosion happens when materials interact with water and oxygen, but the chromium in stainless steel creates a passive film that protects the metal from rusting when it’s exposed to weathering. It will even self-heal when it begins to oxidise. This is what makes stainless steel a perfect metal for building durable, weather resistant clothing. We’ve also treated the outside of the jacket with a water repellent coating so that light rain will roll off its surface.

In the cryogenic temperatures of outer space, stainless steel increases in strength by up to 50%.

Size + Fit

The Steel Blazer is designed with a regular fit.

Size XS S M L XL XXL
Fits chest 83 - 90 91 - 98 99 - 106 107 - 114 115 - 122 123 - 130
Fits waist 71 - 76 76 - 81 81 - 86 86 - 91 91 - 96 96 - 101
Size XS S M L XL XXL
Fits chest 33 - 36 36 - 39 39 - 42 42 - 45 45 - 48 48 - 51
Fits waist 28 - 30 30 - 32 32 - 34 34 - 36 36 - 38 38 - 40